No Modifications to the Chassis, such as lighting and drilling holes. No Modifying Any Components Unless Otherwise Specified
All Suspension Components Must Be Installed In The Proper Position and Orientation On the Car
Traxxas LCG is Allowed, Also UNmodified In Any Way
The following components may be used, but must remain unmodified: Traxxas Slash Aum, Steering Bell Cranks, Caster Blocks, Steering Blocks, Camber Links, Rear Axle Carriers, Front Steering Blocks, Caster Blocks, Front & Rear Bumpers, Front & Rear Suspension Arms.
Traxxas Front Bumper TRA2735 Angled Down Recommended
Traxxas Spur Gears Allowed 76T, 83T, 86T, 90T
Unless Otherwise Stated, Factory Traxxas Parts Must Be Used
Locking or Modifying the Differential In Any Way Will Not Be Allowed. The differential must have normal diff. action and cannot turn the motor over when rotating one rear tire against the normal compression resistance of the motor. NO Ball Diffs
Battery must be in stock center tray location, but can be moved forward or back as long as it stays within the stock boundaries of the battery tray.
NO Modifications can be made to the Transmission Case.
RPM Transmission Case may be used, but ONLY with the 3 degree toe-in blocks which match the stock slash fixed setting. Stock slash differential must be maintained.
Salvas Style MudBoss Bodies ONLY!
Traxxas wheel spacers (Black, Grey, or any combination of both) are allowed in any position.
The ONLY Adjustments allowed to the car are those allowed by these rules.
Any additional weight must be added within the main chassis plate area and firmly attached.
ESC, Transponder, Receiver can be mounted anywhere in the main chassis plate area ONLY
Minimum Ride Height is .50" (including the body)
Original Rear and Front Springs ONLY
Front Springs may be cut in order to shorten them
Traxxas 2wd Plastic Shocks ONLY, NO modifications can be made unless specified below
Traxxas Aluminum Shock Caps may be use #3767
Shocks travel may be shortened with internal shims to adjust ride height and droop
Original Shafts must be used in original bodies (length and type in proper body)
Any Diff Weight Shock Oil may be used
NO Sway Bars
2 Stage Pistons or any modifications to the shock to tune compression and rebound separately will NOT be allowed
MudBoss Body or dimensional alternative MUST be used
The following Chassis Alterations MUST be done to accommodate body:
- Front Body Post MUST Be Removed
- Front Bumper MUST Be Removed
- Side Nerf Bars May Be Removed
- Front Body Posts MUST be moved to Front Holes of Side Bumpers
- Proline Body Post may be Used
Motor: Any 13.5T Brushless Motor
ESC: No Restriction, Any Allowed
Any Steering Servo Allowed
Any Transmitter/Receiver is Allowed
Battery: Any Standard Size 7.4v 2S Battery, Hard Case Only, NO Short Packs. Any Style Connector or Bullets Allowed