- Traxxas Slash 2wd Only
- No Modifications to the Chassis, such as lighting and drilling holes. No Modifying Any Components Unless Otherwise Specified
- All Suspension Components Must Be Installed In The Proper Position and Orientation On the Car
- Traxxas LCG is Allowed, Also UNmodified In Any Way
- The following components may be used, but must remain unmodified: Traxxas Slash Aum, Steering Bell Cranks, Caster Blocks, Steering Blocks, Camber Links, Rear Axle Carriers, Front Steering Blocks, Caster Blocks, Front & Rear Bumpers, Front & Rear Suspension Arms.
- Traxxas Front Bumper TRA2735 Angled Down Recommended
- Traxxas Spur Gears Allowed 76T, 83T, 86T, 90T
- Unless Otherwise Stated, Factory Traxxas Parts Must Be Used
- Locking or Modifying the Differential In Any Way Will Not Be Allowed. The differential must have normal diff. action and cannot turn the motor over when rotating one rear tire against the normal compression resistance of the motor. NO Ball Diffs
- Battery must be in stock center tray location, but can be moved forward or back as long as it stays within the stock boundaries of the battery tray.
- NO Modifications can be made to the Transmission Case.
- RPM Transmission Case may be used, but ONLY with the 3 degree toe-in blocks which match the stock slash fixed setting. Stock slash differential must be maintained.
- Salvas Style MudBoss Bodies ONLY!
- Traxxas wheel spacers (Black, Grey, or any combination of both) are allowed in any position.
- The ONLY Adjustments allowed to the car are those allowed by these rules.
- Any additional weight must be added within the main chassis plate area and firmly attached.
- ESC, Transponder, Receiver can be mounted anywhere in the main chassis plate area ONLY
- Minimum Ride Height is .50" (including the body)
- Original Rear and Front Springs ONLY
- Front Springs may be cut in order to shorten them
- Traxxas 2wd Plastic Shocks ONLY, NO modifications can be made unless specified below
- Traxxas Aluminum Shock Caps may be use #3767
- Shocks travel may be shortened with internal shims to adjust ride height and droop
- Original Shafts must be used in original bodies (length and type in proper body)
- Any Diff Weight Shock Oil may be used
- NO Sway Bars
- 2 Stage Pistons or any modifications to the shock to tune compression and rebound separately will NOT be allowed
- MudBoss Body or dimensional alternative MUST be used
- The following Chassis Alterations MUST be done to accommodate body:
- Front Body Post MUST Be Removed
- Front Bumper MUST Be Removed
- Side Nerf Bars May Be Removed
- Front Body Posts MUST be moved to Front Holes of Side Bumpers
- Proline Body Post may be Used
- Motor: Any 17.5T Brushless Motor
- ESC: No Restriction, Any Allowed
- Any Steering Servo Allowed
- Any Transmitter/Receiver is Allowed
- Battery: Any Standard Size 7.4v 2S Battery, Hard Case Only, NO Short Packs. Any Style Connector or Bullets Allowed
- Max Charge to 8.4v. NO Over Charging
- Tires: Any SCT Dirt Tires mounted on Any SCT Wheels